The FAST Offset Optic Adapter Plates place mini red dot sights on the FAST™ Offset Optic Base, FAST™ MRDS or MRDS Top Ring for FAST™ LPVO. Plates can mount in three positions on the Offset Optic Base (forward cantilever, centered, rearward cantilever) for a customized fit.

Each plate comes with a specific optic footprint and uses the optic manufacturer’s hardware. Each plate footprint will accept any micro red dot with that footprint pattern. See Compatibility section below for full details.

WEIGHT:

OZ: < 0.75
G: < 22.0

MATERIAL:

7075-T6 Aluminum

COATING:

Type III Hardcoat Anodized

MOUNT TYPE:

FAST™ Offset Optic Base (Sold Separately)
MRDS Top Ring for FAST™ LPVO (Sold Separately)
FAST™ MRDS (Sold Separately)

• NOTE: The FAST™ Optic Adapter Plate with an Aimpoint® Micro footprint is NOT compatible with the FAST™ MRDS.
• NOTE: FAST™ Optic Adapter Plates manufactured prior to July 2023 are NOT compatible with the FAST™ MRDS or the MRDS Top Ring for FAST™ LPVO.

COMPATIBILITY:

• Aimpoint® Micro Footprint: Designed for Aimpoint® Micro (H1, H2, T1, T2) and other optics with an Aimpoint® Micro footprint, such as those found on many Sig Sauer®, Holosun®, Primary Arms® and Vortex Optics® platforms.
• RMR® Footprint: Designed for Trijicon® RMR® and other optics with an Trijicon® RMR® footprint, such as those found on many Trijicon® and Holosun® platforms.
• ACRO® Footprint: Designed for Aimpoint® ACRO® and other optics with an Aimpoint® ACRO footprint, such as the Steiner™ MPS.
• DeltaPoint® Pro Footprint: Designed for Leupold® DeltaPoint® Pro and other optics with a DeltaPoint® Pro footprint, such as those found on many Sig Sauer® and EOTech® platforms.
• 509T Footprint: Designed for Holosun™ 509T and other optics with a Holosun™ 509T footprint.
• RMSc / Holosun™ K Footprint: Designed for Holosun™ 507K and other optics with a Shield™ RMSc footprint, such as those found on many Sig Sauer®, Holosun® and Shield™ Sights platforms.

*NOTE: “FDE” is used throughout our catalog to reference a spectrum of colors that include tan, brown, bronze, earth, and everything in between. Due to the chemical process that takes place during Type III Hardcoat, the final finish can vary from part to part (even parts done in the same batch). Therefore, your “FDE” product may vary from other parts from UNITY and other companies, and may vary from the photos shown online.